We provide our customers with a friendly, experienced point of contact to source Bailey Bailey Low Pressure Top (Conversion) Kit. We have a broad range of capabilities and bring a wealth of experience and additional value. This means we can supply spare parts or complete products with competitive pricing and delivery. Please complete the form at the bottom of this page or send your RFQ to baileybirkett@chaseint.co.uk.
Bailey produce a wide range of dependable pressure reducing valves. They independently and without intervention monitor the supply pressure and automatically deliver a consistent reduced pressure for the operator.
CHASE has supplied Bailey Birkett safety valves for many years. We have a close working relationship with Bailey Birkett manufacturers, Emerson.
Customers use the Bailey range of pressure reducing valves throughout the world on a huge array of applications.
BAILEY LOW PRESSURE TOP (CONVERSION KIT)
When you use steam, air, water, liquids, gas or chemicals in your application then boilers, pumps and compressors often pressurise the system. The initial system pressure is usually high due to the use of small diameter piping systems. It will be substantially higher than the pressure required by the final application. These applications require reliable, constant and stable reduced pressures..
pilot operated pressure reducing valve provides extremely accurate levels of pressure regulation for steam, air and industrial gas applications. It will maintain a constant outlet pressure irrespective of variations in the inlet pressure or demand from the system.
The standard G4 pilot top can reduce pressures down to 0.35 Barg (5 Psig). For pressures below this, a bronze low pressure pilot top can be fitted in place of the standard top. This is suitable for outlet pressures from 0.07 to 0.35 Barg (1 to 5 Psig).
The low pressure top is available for fitting on to valve sizes 15 to 100mm (1/2 to 4 inch). You should always fit a balance line to a low pressure top, on steam duty and never on air/gas duty.
The low pressure top can also be supplied as a conversion kit, allowing existing valves and stock to be modified quickly should the need suddenly arise.