Bailey Low Pressue Top (Conversion Kit)

Bailey produce a wide range of dependable pressure reducing valves which independently and without intervention monitor the supply pressure and automatically deliver a consistent reduced pressure for the operator, day and night.

The Bailey range of pressure reducing valves is used throughout the world on a huge array of applications.

When steam, air, water, liquids, gas or chemicals are used, boilers, pumps and compressors are often required to pressurise the system. The initial system pressure is usually high due to the use of small diameter piping systems, and it will be substantially higher than the pressure required by the final application. These applications require reliable, constant and stable reduced pressures.

The G4 pilot operated pressure reducing valve provides extremely accurate levels of pressure regulation for steam, air and industrial gas applications. It will maintain a constant outlet pressure irrespective of variations in the inlet pressure or demand from the system.

The standard G4 pilot top can reduce pressures down to 0.35 Barg (5 Psig). For pressures below this, a bronze low pressure pilot top can be fitted in place of the standard top, suitable for outlet pressures from 0.07 to 0.35 Barg (1 to 5 Psig).

The low pressure top is available for fitting on to valve sizes 15 to 100mm (1/2 to 4 inch), and a balance line should always be fitted to a low pressure top, on steam duty and never on air/gas duty.

The low pressure top can also be supplied as a conversion kit, allowing existing valves and stock to be modified quickly should the need suddenly arise.

The BAILEY brand and BAILEY products are owned and manufactured by Pentair.